Titanium Expanded Metal Mesh

Titanium expanded metal mesh is made of titanium sheets or coils. It is cut and stretched through an automatic expanding machine to form a metal mesh with uniform diamond-shaped openings. Due to titanium expansion mesh is with excellent acid and alkali resistance, it is often used in chemical filtration and as an electrode for chlorine extraction.

Hole pattern: diamond, hexagon

Surface type: raised or flattened

We can provide various types of expanded titanium mesh, and can also be customized according to your needs.

Features

• Lighter weight
• Excellent corrosion resistance
• Low-temperature resistance
• Superior seawater oxidation resistance
• Long service life – usually more than 30 years

Application

Titanium expanded metal can be used for sieving, filtration, separation media, etc. Due to the characteristics of titanium, titanium expanded metal sheet is usually used for filters, ion exchange membrane electrodes, battery electrode mesh, oxygen cathode ion membranes, electrolytic cell titanium anodes, electroplating anode mesh, etc.

Terminology

Percent Open Area: The amount of open area to determine the amount of light or air passage.

SWD: The distance from a point on a bond to a corresponding point on the following bond measured across theShort Wayof Design. This distance is also sometimes referred as "pitch SWD".

LWD: The distance from a point on a bond to a corresponding point on the following bond measured across the Long Way of  Design. This distance is also sometimes referred as "pitch LWD".

SWO: Short Wayof Opening, the distance measured from the inside of the bond across to the inside of the bond SWD.

LWO: Long Way of Opening, the distance measured from the inside of the bond across to the inside of the bond LWD.

Bond: The intersection of two strands and it is always the width of two strands.

Strand Thickness: Gauge thickness of expanded metal. 

Strand Width: Amount of metal fed under dies to produce the expanded metal strand.

Overall Thickness: The actual measurement of the thickness of the mesh measured at the bond.

Standard Expanded Metal: Also called regular, unflattened or raised expanded metal. Expanded metal as it comes from the press. The strands and bonds are set at a uniform angle to the plane of the sheet, adding strength and rigidity as well as a skid-resistant surface. 

Flattened: Standard expanded metal that has been passed through a cold roll mill. The bonds and strands are turned down to produce a smooth, flat surface. The flattening process reduces the original gauge of the base metal, and the strand width increases slightly.

Titanium expanded metal size

Panel/Roll Width: 36 inch, 1Metre, 48inch

Panel/Roll Length: 72 inch, 2Meter, 96inch

Mesh size: 0.5X1、0.6X1.2、1X2、1.5X3、2X2.5、2X4、3X6、4X8X、5X10、6X12、8X16、10X20 mm, etc. Custom-made.